| Coaxial Cable Reel: |
Spring powered cable reels that store communication cables as the tower is raised or lowered. One or more cable reels can be located on the tower frame and additional cable reels can be located on the tower work platform on top of the tower mechanism enclosure, per customer requirements. |
| 4-Gang Coaxial Cable Reel: |
A manual crank, cable reel that will store four like diameter cables can be mounted in the tower frame. This cable reel requires attendance when the tower is raised or lowered. |
| Power Cable Reel: | Provides 4- 16 gauge conductors to top of tower and spring powered cable reel with conductor rings |
| Power Cable Reel: |
Provides 10- 14 gauge conductors to top of tower and spring powered cable reel with conductor rings |
| Aluminum Trailer: |
An aluminum trailer can be provided for the PT-100 or PTM-100 tower units a lighter alternative to the steel trailers. |
| 2 foot Trailer Extension: |
The PT-100 and PTM-100 trailer tongue frame can be extended 2 feet (.61 meters) to allow additional space in the tongue area for customer equipment. |
| Electrical Box Base: |
A picture frame-like, channel based, structure welded to the trailer frame can be provided as a mounting base for customer provided electrical boxes: |
| Spare Tire: |
Portable tower units can be provided with a spare tire and rim mounted on the trailer. |
| Lifting Lugs & D-rings: |
Tower units can be fitted with lifting lugs and D-rings to facilitate vertical lifts from above. |
| Custom Paint: |
Limited, alternative colors are available. |
| Zinc Undercoating: |
Steel trailers can be provided with a Zinc undercoating for extreme salt conditions. |
| Carlisle Brake System: |
A Carlisle electric brake box and adapter system is available that allows the trailer to be towed by several vehicles without modification to tow vehicle’s brake or electrical system. |
| Guy-wire Kit for Multiple units: |
For customers with multiple units at a single location, a guy-wire kit comprised of only guywires, anchors, and attachment slings is available (no tools or measuring equipment included) |
| Guy-wire and Guy-wire Install Kit: |
A complete guy-wire kit with anchors plus the tools and measuring instruments required to properly install the guy-wires. |
| Storage Box: | Storage box for stowing a guy-wire kit or customer supplied equipment. |
| 3/8 inch (.95 centimeters) mounting plate: |
A 3/8 inch (.95 centimeters) thick, aluminum, mounting plate can be provided that attaches to the top of the tower for mounting customer equipment. Modifications to the plate can be included per customer specifications. |
| 2 inch (5.08 centimeters) diameter adjustable side tower mount: | A 2 inch (7.62 centimeters) diameter x 36 inch (91.44 centimeters) mounting tube bracket can be attached to one of the three tower sides for attachment of small antennas or other customer equipment. It has an adjustable offset from the tower. |
| 3 inch (7.62 centimeters) diameter corner tower mount: |
A 3 inch (7.62 centimeters) diameter x 36 inch (91.44 centimeters) mounting tube bracket can be attached to one of the three corners between the tower sides for attachment of small dish antennas or other customer equipment. |
| 2 inch (5.08 centimeters) diameter Tower Top Bracket: |
A Christmas tree style bracket can be attached to the top of the tower to accept a 2 inch (5.08 centimeters) diameter pipe or antenna mount. |
| 3 inch (7.62 centimeters) diameter Tower Top Bracket: |
A Christmas tree style bracket can be attached to the top of the tower to accept a 3 inch (7.62 centimeters) diameter pipe or antenna mount. |
| 4.5 inch (11.43 centimeters) diameter Tower Top Bracket: |
A Christmas tree style bracket can be attached to the top of the tower to accept a 4.5 inch (11.43 centimeters) diameter pipe or antenna mount. |
| Double Whip Antenna Bracket: |
The tower can be provided with an antenna bracket for two whip antennas with an 8 foot (2.44 meters) separation. |
| Four Whip Antenna Bracket: | The tower can be provided with an antenna bracket for four whip antennas with an 8 foot (2.44 meters) separation. |
| Guardrail System: |
A guard rail system can be provided for the work platform. The guard rail perimeter mounting channel is attached to the top work platform at the sides and corners. Aluminum guard rail tubes 42 inch (1.07 meters) high attach to the mounting channel and offer intermediate rails and kick boards. Chains enclose the entry points. The guard rails are designed to be removed from the mounting channel for transit. |
| Guardrail Bracket System: |
A guard rail bracket system can be provided that will accept customer provided guardrails and kick boards. The guard rail brackets accept 2 inch (7.62 centimeters) aluminum tubes as well as kick boards and are located on the corners, mid-point of each side, and adjacent to the ladder entrance location. |
| Equipment Lifting Boom: | A lifting boom is available for raising equipment from the ground to the tower work platform. Once the boom is secured to the top of the tower on mounting brackets, raising the tower facilitates the lifting process. |
| Aircraft Warning Light: | An aircraft warning light that is mounted on top of the tower can be provided. This light is available (in either 12 VDC or 120VAC). |
| Enclosed Tower Cabinet: (where applicable) |
The tower frame can be provided with a metal cabinet with lockable doors that covers the tower mechanism. Two doors must be opened to allow clearance for rotating tower components while the tower is being raised or lowered. The top of the cabinet functions as a work platform around the hatch from which the tower is raised and includes a non skid surface. |
| Work platform: | Tower units can be equipped with a work platform located on top of the tower mechanism. The platform provides full access to the top of the tower, when in the down position, for easy access to mount or maintain equipment mounted on top of the tower. The platform includes a non-skid surface and a rear mounted ladder for ground access to the platform. |
| Catwalk with guardrails: | Tower units can be equipped with a non-skid catwalk. This catwalk provides access to only the rear side of the tower, while in the down position, for mounting or maintaining equipment located on top of the tower. This option includes a ladder rear mounted for access and fold down side guardrails. |
| Bale Restraints: | A bale restraint bar system can be installed on any tower system with an open tower compartment. The bale restraint system prevents the bales (containing the tower side chains) from movement during air transit or in land transit where the terrain may cause the tower trailer to be tilted at extreme angles. |
| Bale Restraints Enclosed Cabinet: |
A bale restraint bar system for installation on any tower system that includes the enclosed tower compartment. The bale restraint systems prevent the bales from movement during air transit or in land transit where the terrain may cause the tower trailer to be tilted at an extreme angle. The system includes access doors in the enclosure. |
| 30 amp Power Input Lug Box: |
A power connection lug box can be provided to allow the tower to be connected to the customer’s 30 amp power supply. A phase sensor is included to prevent incorrect phase hook-up. |
| 60 amp Power Input Lug Box: |
A power connection lug box can be provided to allow the tower to be connected to the customer’s 60 amp power supply. A phase sensor is included that prevents incorrect phase hook-up |
| 100 amp Power Input Lug Box: |
A power connection lug box can be provided to allow the tower to be connected to the customer’s 100 amp power supply. A phase sensor is included that prevents incorrect phase hook-up |
| 200 amp Power Input Lug Box: |
A power connection lug box can be provided to allow the tower to be connected to the customer’s 200 amp power supply. A phase sensor is included that prevents incorrect phase hook-up |
| 30 amp Manual Transfer Switch: |
A manual transfer switch can be provided to allow an operator to connect the tower to either the portable tower’s gen-set or the customer’s 30 amp power supply. A lug box may also be required |
| 60 amp Manual Transfer Switch: |
A manual transfer switch can be provided to allow an operator to connect the tower to either the portable tower’s gen-set or the customer’s 60 amp power supply. A lug box may also be required (see options) |
| 100 amp Manual Transfer Switch: |
A manual transfer switch can be provided to allow an operator to connect the tower to either the portable tower’s gen-set or the customer’s 100 amp power supply. A lug box may also be required |
| 200 amp Manual Transfer Switch: |
A manual transfer switch can be provided to allow an operator to connect the tower to either the portable tower’s gen-set or the customer’s 200 amp power supply. A lug box may also required |
| 100 amp Auto Transfer Switch: |
The auto transfer switch automatically monitors a shore power source and when that power source fails it automatically starts a standby gen-set and transfers the input power source to the standby gen-set. |
| Remote Receptacle: | A weather proof, 120 volt, 15 amp, duplex receptacle can be mounted either on top of the tower or in the tower compartment. This option does not include a power source to the top of the tower. |
| 9 KW Gas gen-set: | This unit is equipped with a 208 volt, 3-Ph, 9 KW, air cooled, 3,600 rpm, gasoline powered, gen-set with removable cover and electric starter. Power from this gen-set is intended for raising and lowering the tower but can also be used for moderate auxiliary power. |
| 9 KW Diesel gen-set: |
This unit is equipped with a 208 volt, 3-Ph, 9 KW, air cooled, 3600 rpm, diesel powered, gen-set with removable cover and electric starter. Power from this gen-set is intended for raising and lowering the tower, but can also be used for moderate auxiliary power. |
| 10 KW gen-set: | A liquid cooled, diesel powered, 3 cylinder, 10 KW continuous rated gen-set operating at 3,600 rpm, with alternative voltage and phase combinations. This gen-set is fully enclosed in a weather resistant enclosure and mounted on the tower trailer frame. It includes a 20 gallon (75 liter) fuel tank and electric start. This is an alternative to the gas or diesel powered, air cooled gen-sets. Power from this gen-set is intended for raising and lowering the tower, but also can be used for moderate auxiliary power. |
| Set up Lights: | Five quantity 100 watt metal halide, adjustable mounted lights located on the top four corners of the tower cabinet with 1 light shinning up to illuminate the tower while it is raised. All five controlled by a breaker switch connected to the tower power source. |
| Lightning Protection Full System: |
The Full Lightning Rod System includes a lightning rod with mount, insulated tower offset clamps to secure the conducting cable to the tower, heavy strained cable, miscellaneous hardware, and spring powered cable reel that automatically pays out and retracts the conductor cable as the tower is raised or lowered. This option is best suited when there is a crew of a least two personnel when the tower is raised or lowered. When there are additional cables to manage as the tower is raised or lowered more crew personnel may be required. Note: In all tower grounding systems the customer is responsible for establishing an effective earth ground. An effective earth ground is dependent upon many factors including area geology, moisture content, topography, and other factors. |
| Lightning Protection Basic System: |
The Basic Lightning System Includes a lightning rod with mount, insulated tower offset clamps to secure the conducting cable to the tower, heavy strained cable, miscellaneous hardware, and manual cable reel to store cable. This option is best suited when there is a crew of a least two personnel when the tower is raised or lowered. When there are additional cable systems to manage, more crew personnel may be required. Note: In all tower grounding systems the customer is responsible for establishing an effective earth ground. An effective earth ground is dependent upon many factors including area geology, moisture content, topography, and other factors. |
| Bale Warning Lights and Horn: |
A warning light and horn can be installed with a bale (reel that holds the tower side chain links) rotation time delay to provide a warning that the bales will soon begin rotating. |
| Fire Extinguisher: | The tower can be provided with a fire extinguisher and mount. |
| Grounding Rod: |
Extra long grounding rod for customer installation at each tower deployment site. |
