| The Tower | ||
| Height: | Maximum tower height is 80 feet (24.38 meters) deployed from a trailer mount stowed height of 11 feet (3.35 meters). The tower can be stopped at any desired height between its stowed and maximum height. | |
| Payload: | Maximum tower payload capacity at 80 feet (24.38 meters) is 2,000 pounds (907 kilograms) | |
| Construction: | The tower lattice chain sections are constructed of 6061-T6 aluminum extrusions assembled with robust bolts and rivets. During deployment, cast stainless steel hooks engage to rigidly attach and hold together individual tower sections. Key tower technologies are protected by patents.
Heavy mounting brackets are provided as standard equipment at each of the three tower corners for attaching customers' equipment using ½ inch (1.27 centimeters) diameter bolts. | |
| Deployment & Retraction Speed: |
From the tower's stowed height, an electric motor drive will self-erect the tower to a height of 80 feet (24.38 meters) in approximately 5 minutes "at the push of a button". By releasing the button, the tower can be stopped and utilized (held by the brake) at any height between the stowed and maximum limits. | |
| Drive: | Either an AC or DC electric drive gear motor is offered which includes a heavy duty brake that is rated for severe conditions. No active power is required once the tower sections have been raised. | |
| Power Source: | An appropriate AC or DC electrical power source is required for use only when raising or lowering the tower. This can be a customer supplied power source or one of Tower Solutions' available power options. | |
| Emergency Crank Down: |
The tower is equipped with an emergency, manual crank down or up system. If conditions permit, a customer supplied battery-powered electric drill can be substituted for the crank. | |
| Enclosures: | All electrical controls are enclosed in drip proof enclosures. The slowly rotating bales of tower sections are not enclosed. | |
| Standard Leveling System: |
A level sensing system notifies the operator with an indicator light when the unit is level within +/- 1 degree. Level bubble units located at each corner of the trailer facilitate the unit leveling process. Each unit has four drop leg, leveling jacks attached to the trailer frame. | |
| Tower Control System: |
The tower is controlled by UP and DOWN buttons located on a corded remote control pendant, which allows the operator to control deployment and retraction from up to 25 feet (7.62 meters) from the main control box. | |
| Access Catwalk and Ladder: |
Access to customer equipment payload on a retracted tower is provided by a non-skid catwalk. This catwalk offers access from the back side of the payload from a rear mounted ladder on the trailer. | |
| The Outrigger System | ||
| Description: | The outrigger system consists of four tubular assemblies that attach to the corners of the tower trailer frame and extend jacks out 14 feet (4.27 meters) diagonally from the tower vertical centerline, creating a 16'8' x 22' (5.08 x 6.7 meters) support pattern. The outriggers are easily assembled on-site as part of the unit set-up. The outrigger system can accommodate +/- 18 inch (46 centimeters) variance in ground surfaces. When not in use, the outriggers are stored in brackets on the exterior of the tower frame. | |
| The Trailer | ||
| Description: | The tower and outrigger assemblies are mounted on a double axle steel trailer. The trailer is equipped with:
| |
| General Features | ||
| Color: | The standard unit is delivered with the trailer and mechanism tan in color and the tower is natural aluminum. Standard product identification, instructional, safety and operational information decals are strategically applied to the unit for operator convenience and safety. | |
| Overall Size: | The retracted footprint is approximately 102 inches (2.59 meters) wide x 212 inches (5.39 meters) long x 11.5 feet (3.5 meters) high, including (or not including) the trailer hitch. Total approximate weight less customer payload is 10,000 pounds (3,856 kilograms). | |
| Options | ||
| Options are available to meet specific customer requirements. | ||
