PT-100 Portable Telecommunication Unit

General:

• Portable telecommunication unit mounted on single-axle trailer
• Self-erecting tower rises to any height up to 80 feet
• Designed so that four units can be loaded on standard semi-truck trailer
• Tilt-up tower extensions are available as options to increase tower height when required.

Engine:

• water-cooled diesel engine
• 12-volt electric start, glow plug option for cold weather starts
• Critical sound muffler and noise isolation mounts

Generator:

• Generators will be provided per customer requirements and needs
• 120- and 240-volt single-phase output at 60 hertz

Control Panel and Receptacle Outlets:

• 120-volt ground fault outlets
• Tower up and down button controls tower motion
• Emergency stop button

Tower Construction and Performance:

• Tower is comprised of special aluminum alloy extrusions using rivet and bolt construction.
• Tower is raised using a rack and pinion drive powered by a three-hp, three-phase, 480-volt, precision gear motor.
• Electrically operated mechanical brake secures the tower when the motor is not operating or when electrical power is shut off.
• Gear motor is controlled by an inverter, which provides a slow start and stop, and very accurate vertical positioning.
• Tower rises automatically to 80 feet in approximately three minutes when the up button is pressed.
• Tower is capable of lifting 2,500 lbs. or more.
• Tower has high torsional rigidity so that objects located on the top can be rotated when the tower is extended to full height.
• Powered tilt-up sections are available as options to extend tower height.
• Tower is protected by US patent #4,920,710, as well as patents in other countries.

Trailer and Outriggers:

• Trailer frame is heavy duty steel tubular construction coated with two-part epoxy primer and heavy enamel paint.
• Unit upper frame is constructed of heavy wall 6061-T6 aluminum tube and is bolted to the steel trailer frame.
• Brakes are electrically controlled with emergency disconnect stop system.
• Outriggers fold out from stowed position on trailer.
• Electrical level-indicating system with accuracy of one degree indicates via electrical lights, located by each outrigger, which jack needs to be raised to reach a level position.
• Four jack-mounting bracket locations are provided to accommodate the rough leveling jack option for leveling in rough terrain.

Enclosure Housing:

• Housing is heavy aluminum sheet with a powder coat enamel finish.
• Access doors with heavy hinges and latches are provided for easy access to internal components.
• Unit housing provides protection from weather, vandalism, dirt and dust for the tower mechanism during outside storage and towing.

Customization and Options:
We would be pleased to discuss your specific requirements and options available.

back to top

PT-200 Portable Telecommunication Unit

General:

• Portable telecommunication unit mounted on double axle trailer
• Self-erecting tower rises to any height up to 80 feet
• Designed so that four units can be loaded on standard semi-truck trailer
• Tilt-up tower extensions are available as options to increase tower height when required

Engine:

• Water-cooled diesel engine
• 12-volt electric start, glow plug option for cold weather starts
• Critical sound muffler and noise isolation mounts

Generator:

• Generators will be provided per customer requirements and needs
• 120-and 240-volt single-phase output at 60 hertz

Control Panel and Receptacle Outlets:

• 120-volt ground fault outlets
• Tower up and down button controls tower motion
• Emergency stop button

Tower Construction and Performance:

• Tower is comprised of special aluminum alloy extrusions using rivet and bolt construction.
• Tower is raised using a rack and pinion drive powered by a three-hp, three-phase, 480-volt, precision gear motor.
• Electrically operated mechanical brake secures the tower when the motor is not operating or when electrical power is shut off.
• Gear motor is controlled by an inverter, which provides a slow start and stop, and very accurate vertical positioning.
• Tower rises automatically to 80 feet in approximately three minutes when the up button is pressed.
• Tower is capable of lifting 2,500 lbs. or more.
• Tower has high torsional rigidity so that objects located on the top can be rotated when the tower is extended to full height.
• Powered tilt-up sections are available as options to extend tower height.
• Tower is protected by US patent #4,920,710, as well as patents in other countries.

Trailer and Outriggers:

• Trailer frame is heavy duty steel tubular construction coated with two-part epoxy primer and heavy enamel paint.
• Unit upper frame is constructed of heavy wall 6061-T6 aluminum tube and is bolted to the steel trailer frame.
• Brakes are electrically controlled with emergency disconnect stop system.
• Outriggers fold out from stowed position on trailer.
• Electrical level-indicating system with accuracy of one degree indicates via electrical lights, located by each outrigger, which jack needs to be raised to reach a level position.
• Four jack-mounting bracket locations are provided to accommodate the rough leveling jack option for leveling in rough terrain.

Enclosure Housing:

• Housing is heavy aluminum sheet with a powder coat enamel finish.
• Access doors with heavy hinges and latches are provided for easy access to internal components.
• Unit housing provides protection from weather, vandalism, dirt and dust for the tower mechanism during outside storage and towing.

Customization and Options:
We would be pleased to discuss your specific requirements and options available.
Specifications are subject to change without notice

back to top